Fisher Control valve sell to Indonesia

Control-Disk Valve Features Equal percentage flow characteristic Anequal percentage flow characteristic provides an improved throttling range comparable to that of a segmented ball valve. This improved capability allows you to control closer to the target set point, regardless of process disturbances, which results in a reduction in process variability. Global Standards— The valve meets API, ASME, and EN standards, making it suitable for use in all world areas. PEEK/PTFE bearing as standard The PTFE-lined PEEK bearing is a low friction, low wear bearing. It allows the valve to operate under high pressure drops for a high cycle life while maintaining low torque. The “drop-in” bearing design enables fast, easy maintenance. Lower Operating Torques— The equal percentage disk reduces operating torque at peak angles of disk opening.

Read more »

Fisher Control Valve Disk Rotari

The valve body meets PN 10 through PN 40, CL150, and CL300 ratings. Face-to-face dimensions meet EN 558, API 609, and MSS-SP68 standards. Line centering clips provide for versatility to mount and align the same wafer style valve body in different piping configurations (ASME and EN ratings).

The Control-Disk rotary valve features an eccentrically-mounted disk with either soft or metal

seal, providing capability for enhanced shutoff. The interchangeable sealing technology allows for the same valve body to accept both soft and metal seals.

Read more »

Fisher oll Series Regulator Four Sell In Indonesia

An S200 Series regulator with an H or K (Figure 3) in the type number can deliver air or gas at a higher outlet pressure setting than the basic Type S201 (see Table 3). S200 Series regulators with an H or K in the type number have a heavy diaphragm plate, while most other S200 Series regulators have a light diaphragm plate. However, a regulator with a P in the type number will have a light diaphragm plate for outlet pressure ranges under 1 psig / 0.07 bar and a heavy diaphragm plate outlet pressure ranges over 1 psig / 0.07 bar.

Read more »

Fisher Types s202

Types S206 and S206H: Types S202 and S202H constructions with a low outlet pressure shut off with internal relief. Available in Cast iron body only.

Application Flexibility—A wide variety of sizes, body materials and end connection styles available:

NPS 1-1/4, 1-1/2, and 2 / DN 32, 40, and 50 body sizes available in ductile iron, steel, and cost effective cast iron available with NPT, BSP, CL125 FF (available with 7.5-inch or 10-inch / 191 or 254 mm face-to-face dimensions), CL150 RF, CL250 RF, CL300 RF, and PN 10-16 end connections. (Not all sizes and/or materials are available with all end connections. See Tables 1 and 2 for available configurations.)

Read more »

Fisher Control valve

Control-Disk Valve Features Equal percentage flow characteristic Anequal percentage flow characteristic provides an improved throttling range comparable to that of a segmented ball valve. This improved capability allows you to control closer to the target set point, regardless of process disturbances, which results in a reduction in process variability. Global Standards— The valve meets API, ASME, and EN standards, making it suitable for use in all world areas. PEEK/PTFE bearing as standard The PTFE-lined PEEK bearing is a low friction, low wear bearing. It allows the valve to operate under high pressure drops for a high cycle life while maintaining low torque. The “drop-in” bearing design enables fast, easy maintenance. Lower Operating Torques— The equal percentage disk reduces operating torque at peak

angles of disk opening.

Read more »

Fisher Control valve

Control-Disk Valve Features Equal percentage flow characteristic Anequal percentage flow characteristic provides an improved throttling range comparable to that of a segmented ball valve. This improved capability allows you to control closer to the target set point, regardless of process disturbances, which results in a reduction in process variability. Global Standards— The valve meets API, ASME, and EN standards, making it suitable for use in all world areas. PEEK/PTFE bearing as standard The PTFE-lined PEEK bearing is a low friction, low wear bearing. It allows the valve to operate under high pressure drops for a high cycle life while maintaining low torque. The “drop-in” bearing design enables fast, easy maintenance. Lower Operating Torques— The equal percentage disk reduces operating torque at peak

angles of disk opening.

Read more »

Office Gamestri sejahtera

Office :

Gamestri Sejahtera

Rt 03/02 Pulosari Karang Asem, Sroyo Jaten,

Karang Anyar, Solo, Jawa Tengah, Indonesia.

Sales

Muhamad Alifi

085643260296

FOR PRODUCTS:

1. GIRARD

2. PIGS

3. S.U.N. Engineering

3. KNAPP

4. Fisher

5. Foxboro

6. Emerson

Read more »